Subject: BoQ of Civil Works for Construction of 2 Room with Vernad in Goli Basic Health Unit in Abyei Administrative Area.

Item

DESCRIPTION

UNIT

QTY

Unit cost

Total Cost

1

 Site Grading:

Excavations. (Structural)

Excavation (structural & general) for the building foundations in all kinds of soil and rocks including shuttering (if it required as per site conditions) and removal of surplus materials to the outside of site according to specifications and as directed by the Engineer.

Structural Excavation (for Strip Foundation) 50cm *100cm

ml

60.00            

Structural Excavation (for mastaba)

ml

45

2

Filling & Back filling

Filling with well selected material (with 20% moisture content) in 200mm thick layers and compacted up to achieve 95% Procter density. (Item include to supply and apply all material, labor, mechanical compaction and field test etc. complete) For leveling See Drawings

Filling with selected materials under plain concrete

m³

96.0

3

Reinforced slab

Reinforced slab (cast-in-situ) with Fcu not less than 30 N/mm2, using Portland cement, including formworks and additives

Reinforced slab T=10 cm ,10mm@20cm c/c Thick plain concrete for floors of building floors (Including key hole with piping fixation) Fair Face Finish.

m³

8

4

RERINFORCED CONCRET

Reinforced concrete (cast-in-situ) with Fy not less than 460 N/mm2 and Fcu not less than 30N/mm2, using Portland cement. Item includes formwork, additives, reinforcement, scaffolding, supports, all types of joints and curing... etc. complete in place as per drawings and specifications.

For Grade beam Section as per drawings 50cm * 50cm

m³

14

For Roof Beam Section as per drawings 20cm*20cm

m³

2.16

For Lintels per drawings 20cm*20cm

m³

2.16

5

MASONRY WORKS:

Stone Work

Provide, supply and apply 50 cm W x 80 cm thick masonry foundation consist of hard stones and gravels with c/s mortar 1:8.

    m³

20

Bricks Works 

Provide and line up 45 cm wall thickness friendly environmental product mutual to masonry, C/S mix mortar.

m²

27

Provide and line up brick wall thickness 35cm friendly environmental product mutual to masonry, C/S MIX  1:6 mortar. H= 3.4m

m²

204

Provide and line up brick wall thickness 1 brick mutual to masonry, C/S mix mortar, for Mastaba and steps

m²

44.0

6

METAL WORKS:

Provide, manufacture and fix in position trusses (anticorrosion & oil Painted) using 10x5cm 1mm thick rectangular sections for rafters and ties, 8x4cm square section for purlins (Painted) and finished with UK Zinc 40 mm Sheet. and rock wool insulation for main building. As per drawings. Make columns from 4-inch circular pipes with 1 mm

m²

120

7

OPENNING WORKS:

Provide, manufacture and fix painted finished single leaf steel metal door 220x100cm using rectangular and square sections, lock and color as required - Item D1as per drawings. including all accessories and hardware as approved sample.

Pcs

2

Provide, manufacture and fix painted finished tribble leaf steel metal window 120 X 100 cm with grills using rectangular and square sections, fly screen lock and color as required - Item W2 as per drawings. including all accessories and hardware as approved sample.

Pcs

6

8

FINISHES:

Portland cement and sand plaster

Supply and apply 20 mm average thick internal cement and sand plaster (1:6) mix, including surface preparation, spatter dashes & spots, beads, stops, corners, SHOKAT, EDGES, narrow width joint Metal strips, fiber mesh at junctions of different surfaces and grooves, curing, Rate should include the plastering for spouts and Corners, with shadow groove where applicable, complete with all necessary accessories as specified and to the satisfaction of the Engineer

For Internal Walls

m²

68

For external Walls

m²

80

For Mastaba & Steps external Walls (Vertical)

m²

24

9

PAINTING:

Supply and apply one prime coat and two finishing coats of emulsion paint to plastered surfaces, to walls and partitions, columns and all plastered and concrete surfaces, complete with abrasion, hair-cracks fiber repairing and cleaning with penetrating sealer, two coats of pre-mixed putty, as approved coloring paint, supplied in sealed containers, Rate to include 15cm, 2 coats of Oil paint skirting internally and externally, all to the satisfaction of the Engineer.

For Internal Walls

m²

224

For external Walls

m²

144

For Mastaba & Steps external Walls (Vertical)

m²

62

10

CEILINGS

Provide, manufacture and fix in position 60x60 cm Gypsum false ceilings for main building (MEASURED IN M²) Rate should include any extra cost for waste, support, finishing…etc. to the satisfaction of the Engineer.

m²

90

11

CERAMIC TILES:

Supply and install 8 mm thick, vitrified glossy ceramic floor tiles.  fixed on c/s mortar 1:6 mix, bedding, damp proofing, pointing and cleaning complete with all required additives and accessories. Color & sizes to be as per sample & the approval of the engineer.

For Floor rate include skirting.

m²

90

12

ELECTRICAL WORKS:

Supply, install, test, commissioning and hand over in good working conditions complete the electrical system (lighting points and fixtures, switches, sockets, etc) as shown on drawings, specifications, IEE wiring regulations & as required by Local Electrical Authorities (NEC), work  to  include  laying  of conduit , installation  of  boxes  & wiring  from the  brand new distribution  board (supplied by contractor), with the availability to connect a standby generator,  up to  the point complete with  all necessary accessories, hardware, soft ware, for the complete project all up to the satisfaction of the Engineer. All Civil and Finishing Works related to the concerned item shall be included in the unit price, unless otherwise mentioned.

Distribution Board to the capacity of the building. Rate should include effective wiring from nearest power point (min. 15 m).

set

1

Daylight saver 60*60 PHILIPS with boards fixture. (wiring up to the switch) wall mounted internally and externally. Supply, install, test and commission a complete lighting point including all conductors, cables (up to 1.5 mm2), conduits (PVC or galvanized if exposed), switches, boxes, flexible connection above false ceiling by flexible zinc steel strip spiral wound, continues PVC sheath covered conduit with accessories, 2-gang, 2- way lighting switchas specified and detailed on drawings.

set

12

13 A, 3-pin socket outlet

set

12

Ceiling Orient or equivilant fan, include fan hooks, fittings and accessories.

set

4

13

Total SDG